Deco Shine-A Cast, 5 Gallons

DESCRIPTION:
SilaCast BES is a penetrating enhancing sealer designed to restore and renew concrete pavers. SilaCast BES will
create a true “wet look” and enhance the natural colors in the substrate.

Benefits:
-Creates a “wet look” appearance
-Enhances the appearance of the substrate
-Long term resistance to water blushing
-Resistant to mildew growth
-UV protected
-Scratch resistant
-Penetrates deep into the pores for a better seal job
-Non- toxic Non- hazardous Non- flammable
-Excellent adhesion to bare pavers, concrete, stamped
-concrete, natural or artificial stone and clay roof tiles

APPLICATION:SilaCast BES is a single component, one coat application
*DO NOT INSTALL WHEN RAIN IS ECPECTED WITHIN 24 HOURS

COVERAGE RATES:
Coverage rates vary depending on porosity of the surface, type of paver, age and other environmental
conditions. Average coverage rate is 800- 1000 square feet per 5 gallon pail on pavers and porous surfaces.
Stamped concrete and less porous materials can get up to 1200 sq ft per bucket.

LIMITATIONS:
Weather:
Do not let product freeze. Store indoors at temperatures above 32 degrees Fahrenheit. Do not let product sit
in direct sunlight or exposed to temperatures above 100 degrees Fahrenheit. Do not apply product when
temperatures are below 50 degrees Fahrenheit and over 95 degrees Fahrenheit. Do not apply when threat of
rain is imminent.
Surfaces:
SilaCast BES is designed for concrete pavers, concrete tiles, natural stone, travertine and other porous
surfaces. It is not recommended to apply SilaCast BES to raw concrete surfaces. Undesired results may
occur. The use of Deco 20 Clear Finish or Salt Shield is a better option. Please contact a Deco representative
for more information.
It is recommended to have a skilled applicator apply our products.